Send Message
Home ProductsStrip Straightener Machine

Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device

Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device

  • Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device
  • Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device
  • Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device
  • Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device
Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device
Product Details:
Place of Origin: Guangdong, China (Mainland)
Brand Name: RUIHUI
Certification: CE, ISO certification
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Packaging Details: Wooden Box or Vacuum Packing
Delivery Time: 30 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 30 Sets Per Month
Contact Now
Detailed Product Description
Place Of Origin: Guangdong, China (Mainland) Brand Name: RUIHUI
Condition: New Product Name: NC Servo Feeder
Name: NC Servo Feeder Stock Width: 20-1000mm
Stock Thickness: 0.3-3.2mm Releasing Performance: -80
Motor: Yaskawa Bearing: Japan NSK
Power: 3Phase 220V/380V/50HZ
High Light:

sheet straightening machine

,

metal straightener

Servo Feeder Feeding Length, Metal Parts Stamping Processing, Servo Feeder, Automatic feeding device
http://www.ruihui.net

There are often some minor faults when using the feeder, and the servo feeders generally have the following five types of faults:

1. The feeding error has a fixed direction. There are several reasons for this problem: the pressure of the feeding roller is insufficient; the feeding length is too long or too short; the mold has burrs or foreign objects.

For different solutions, increase the pressure, the width of the coil and the appropriateness of the mold guide plate, or whether the tool and the NC feeder are in line, check the baffle and the stripper.

2. Sudden error during feeding. In this case, the NC feeder has an error in the adjustment of the material. Whether the leveling machine and the servo feeder match or the distance between the leveler and the NC feeder and the height of the material arc Whether the number of revolutions of the punch is appropriate or not, and the transmission gap between the roller and the servo motor is relatively large. At this time, just tighten the belt of the pulley.

3. The error of feeding quantity and the direction are not allowed. Generally, metal or other foreign matter enters the feeding roller or gear, and the timing of feeding start, relaxation and punching action interferes. When the material is fed into the feeder, the roller will slip. Knowing the cause of the failure only requires a really different problem to make adjustments.

4. the feeding amount is twice or more than usual, this situation often occurs, should immediately check the servo feeder to start the micro switch and wire terminals, etc. whether there is noise interference; if there is noise interference, replace the micro switch The wire between the terminal block and the terminal block. A metal mesh isolation line is used.

5. sometimes the roller will be loose, this is due to the abnormal vibration of the micro switch SW signal of the punching cam and the offset of the feeding direction, and the air pressure component is not working properly. At this time, only the air pressure component needs to be adjusted. Properly replace or replace the solenoid valve, cylinder, piping, etc., and check if the wire is disconnected or replace the micro switch or replace the relay in the electrical box.

servo feeder

Specification:
 

Model MAC2-400 MAC2-500 MAC2-600 MAC2-800
Stock Width(mm) 50-400 50-500 50-600 50-800
Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2
Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000
Max.Coil O.D.(mm) 1200 1200 1200  
Coil I.D.(mm) 8 8 508 508
Feed Length(mm) ~500* ~500* ~500* ~500*
Max. Line Speed(m/min) 16-24 16-24 16-24 16-24
Work Roll Number(pieces) upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
Feed Roll Number(set) 1 1 1 1
Main Motor(kw) AC2.9 AC2.9 AC4.4 AC4.4
Mandrel Expansion hydraulic hydraulic hydraulic hydraulic
Reel Motor(kw) 1.5 1.5 1.5 2.2 2.2 3.7
Power(V) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49 0.49 0.49 0.49


Straigtening performance:
 

tock Thicknees (mm) Stock Width (mm)
0.3 400 500 600 800
0.4
0.6
0.8
1.0
1.2
1.4
1.6 470 470
1.8 400 400
2.0 360 360
2.3 300 300 300 300
2.5 230 230 230 230
2.8 150 150 150 150
3.2 110 110 110 110


*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device 1
Metal Parts Stamping Processing Servo Feeder Machine , Automatic Feeding Device 2

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Contact Details
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Person: Calin Deng

Tel: 13826917409

Fax: 86-769-89296723

Send your inquiry directly to us
Best Products
Other Products