Send Message
Home ProductsCoil Feeder Straightener

Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line

Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line

  • Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
  • Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
  • Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
  • Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
  • Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
  • Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line
Product Details:
Place of Origin: Guangdong, China (Mainland)
Brand Name: RUIHUI
Certification: CE, ISO certification
Model Number: MAC4
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Packaging Details: Wooden Box or Vacuum Packing
Delivery Time: 30 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 30 Sets Per Month
Contact Now
Detailed Product Description
Condition: New Type: Straightener Feeder & Uncoiler
Use: Sheet Place Of Origin: Guangdong, China (Mainland)
Brand Name: RUIHUI Model Number: MAC4-1300
Voltage: 380V 50Hz Power(W): 11KW
Dimension(L*W*H): 2000*1300*2220 Weight: 1.5-11T
Certification: CE ISO Material Width: 70-1300mm
Material Thickness: 0.6-6.0mm Coil Weight: 7000kg
Work Roll Number: Upper 4 /down 3 Feed Roll Number: 1
Main Motor: AC11 Mandrel Expansion: Hydraulic
Name: Straightener Feeder Keyword: Uncoiler Equipment
Color: Customized
High Light:

coil feeding equipment

,

sheet metal coil feeder

Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line


The roller feeder is favored by the stamping customers because of its high efficiency, high precision, no energy consumption, high cost performance and low failure rate. It is only necessary to ensure its long-term efficiency and stability during the long-time high-load stamping and feeding process. Reducing downtime, inseparable from reasonable maintenance and proper operation, only careful maintenance, maintenance and daily inspection of the roller feeder's operating conditions can avoid its failure and maximize its use value.

1. Note when using the roller feeder:
(1) The actual maximum feeding width of the roller feeder is 10mm minus the existing roller specifications of Jinzhide (because it has a retaining wheel to avoid biasing), and this range cannot be exceeded. Otherwise, the feeding accuracy will be unstable. The delivery distance is not accurate, and even the roller parts are damaged.

(2) The adjustment of the feed length of the roller feeder should be slightly longer than the inching test. Before the continuous feeding of the roller feeder, the inching test is required to determine the feeding length. When the sewing is inert, the feeding length will be longer. When the actual continuous production, there is no brake inertia, the feeding length will become shorter. The adjustment of the length of the roller feeder should be slightly longer than the inching test.

(3) When the feed length of the roller feeder changes greatly, the position of the roller arm needs to be re-adjusted. If the feed length changes greatly, the angle between the rocker arm and the tie rod will change. At this time, the pull rod should be rotated to make the angle between the rocker arm and the pull rod 90 degrees when the press is stopped at the top dead center position, to avoid the breakage of the rocker arm or the drive shaft.

(4) After replacing the mold, the feed height of the roller feeder should be re-adjusted. Multiple sets of stamping dies should be used in the stamping production process, and the mold line heights of different molds are different. Only when the feeding height of the feeder and the height of the mold material line are the same, the feeding can be accurate and smooth.

 

Correct adjustment method:
1. When the mold line is not much different, adjust the two M14 screws that are fixed on the mounting plate by the roller feeder. Rotate and adjust the screw to adjust the screw to the required height.

2. When the mold line differs greatly, the adjustment method is as follows: if the mold line is very different, the length of the roller feeder link should be adjusted. Firstly, remove the connecting rod and the mounting plate, and then fix the roller to the appropriate height, then Method 1 adjusts, finally adjust the roller link, and then install the roller in turn.

(5) When the stamping production line is shut down, the punching machine must be stopped first, and then the flattening machine should be stopped to avoid insufficient supply of stamping materials due to premature shutdown of the leveling machine.

(6) When the roller feeder is working, it should always check whether the feeding length and feeding accuracy are correct, find the problem as soon as possible, and solve it quickly to avoid affecting the stamping production.
Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line 0Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line 1Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line 2

 

Specification:
 

Model MAC2-400 MAC2-500 MAC2-600 MAC2-800
Stock Width(mm) 50-400 50-500 50-600 50-800
Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2
Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000
Max.Coil O.D.(mm) 1200 1200 1200  
Coil I.D.(mm) 8 8 508 508
Feed Length(mm) ~500* ~500* ~500* ~500*
Max. Line Speed(m/min) 16-24 16-24 16-24 16-24
Work Roll Number(pieces) upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
upper 6
lower 5
Feed Roll Number(set) 1 1 1 1
Main Motor(kw) AC2.9 AC2.9 AC4.4 AC4.4
Mandrel Expansion hydraulic hydraulic hydraulic hydraulic
Reel Motor(kw) 1.5 1.5 1.5 2.2 2.2 3.7
Power(V) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49 0.49 0.49 0.49


Straigtening performance:
 

stock Thicknees (mm) Stock Width (mm)
0.3 400 500 600 800
0.4
0.6
0.8
1.0
1.2
1.4
1.6 470 470
1.8 400 400
2.0 360 360
2.3 300 300 300 300
2.5 230 230 230 230
2.8 150 150 150 150
3.2 110 110 110 110


*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line 3
Fully Automatic Coiling Handling Process Roll Feeder Straightener Decoiler Line 4

1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.

Contact Details
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Contact Person: Calin Deng

Tel: 13826917409

Fax: 86-769-89296723

Send your inquiry directly to us
Best Products
Other Products