Shanghai Punch Feeding Line Height, Guangdong Servo Feeder Metal Sheet Processing

After the new mold of the punching device, the height of the feeding line should be adjusted in height or down. After the adjustment of the feeding height of the feeder is confirmed, it is necessary to confirm that the height regulating bolt on the device plate of the punching feeder can be adjusted to the limit. No conditioning to the required feeding height, CNC correction machine price.

If it can be satisfied, simply loosen the two M16 fixing bolts fixed to the device board by the punch feeder, and then rotate the height-adjusting bolts on the punch feeder unit plate to adjust to the required height and fix the high-speed roller. The bolts on the board are locked.

If it is not enough, the whole machine needs to be removed at this time, and the fixed height of the device plate is re-punched, so that the conditioning height can meet the new mold line height request.

The curved groove fixing plate and the curved groove fixing plate are fixed on the plane side of the sliding plate, and the inner clamping plate is located between the two curved groove fixing plates, and the outer shape is an angle steel shape, and the vertical surface thereof is opposite to the fixed plate, and a roller is fixed on the degree surface thereof. The inner splint can be moved along the curved groove of the two curved groove fixing plates. The other side of the sliding plate is connected to the fixing plate, and the dovetail groove of the fixing plate cooperates with the sliding inner clamping plate, and the sliding inner clamping plate can move up and down along the dovetail groove of the fixing plate.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi